- Metrobility Optical System 8100 Managed Hub 10/100Mbps Installation & User Guide 8124-01-M, 8124-01-S, 8112-01-M, 8112-01-S

76 CenturyStack 8100 Managed Hub
Trap Receiver Setup
Traps are messages sent across the network to an SNMP Network
Manager. These messages alert the network manager for network manage-
ment purposes. You can set up six trap receivers.
You can configure the following:
Community Name: The authorized SNMP community string
of the remote network manager. (maximum 16 characters)
IP Address: The IP Address of the remote network manager
station to which traps should be sent.
Status: A community name can be active or inactive.
Community names that are set to active receive traps.
Trap Receiver Setup