User Manual

8 Installation Guide
AN indicates that auto-negotiation is enabled.
+ indicates the switch is enabled (OPEN) .
— indicates the switch is disabled (CLOSED).
A blank space indicates that the switch setting is not applicable and
can be either OPEN or CLOSED.
noitarugifnoC1troP2troP3troP4troP
1troP2troP3troP4troPDF1NA1M0012NA2M0013NA3M0014NA4M001
NA NA NA NA + + + +
NANANAlluF001++ + + —+
NA NA NA flaH001 — + + + — +
NANANAlluF01++ + + ——
NA NA NA flaH01 — + + + — —
NANAlluF001lluF001++ + —+—+
NA NA lluF001 lluF01 + + + — + — —
NANAflaH001flaH001—+ + —+—+
NA NA lluF01 lluF01 + + + — — — —
NANAflaH01flaH001—+ + ———+
NA lluF001 lluF001 lluF001 + + — + — + — +
NAflaH001flaH001flaH001—+ —+—+—+
NA lluF001 lluF01 lluF001 + + — + — — — +
NAflaH01flaH001flaH01—+ ———+——
NA lluF01 lluF01 lluF01 + + — — — — — —
NAflaH01flaH01flaH01—+ ——————
lluF001 lluF001 lluF001 lluF001 + — + — + — + — +
flaH001flaH001flaH001flaH001 ——+—+— +—+
lluF01 lluF01 lluF01 lluF01 + — — — — — — — —
flaH01flaH01flaH01flaH01 —————— — ——
lluF01 lluF001 lluF01 lluF001 + — — — + — — — +
flaH01flaH001flaH01flaH001 ————+———+
lluF01 lluF01 lluF001 lluF001 + — — — — — + — +
flaH001flaH001flaH01flaH01——+—+————
The table below displays sample port configurations and the DIP switch
settings used to obtain them. The configuration column gives the auto-
negotiation, speed and duplex options for each port. By default, all four
ports are set to auto-negotiate.