User guide

6 Installation Guide
2
1
Installation Guide
Follow the simple steps outlined in this section to install and start using the
Radiance R1000 Premise Service Platform.
Unpack the Platform and Accessories
Check that the following components have been included:
• Radiance R1000 Premise Service Platform
• Four (4) rubber feet
• 19" Rackmounting hardware (2 brackets and 8 screws)
• Power cord (one for each AC power supply)
• CD-ROM
The following items are available separately:
• NetBeacon software
• Line cards
• 23" Rackmounting hardware
Your order has been provided with the safest possible packaging, but
shipping damage does occasionally occur. Inspect it carefully. If you
discover any shipping damage, notify the carrier and follow their
instructions for damage and claims. Save the original shipping carton if
return or storage of the unit is necessary.
Mount the Platform
The R1000 is intended for use in office and industrial environments
either as a standalone unit or installed in an equipment rack.
Use the 6-32 self-tapping screws included with the platform to secure
the mounting brackets to the unit.
FX
M M
II
x
T
X
PWRFDMAN
RX
LK
LBK
DIS
RX
LK
LBK
DIS
100 BASE
2