RADIANCE DIN RAIL MOUNTED CHASSIS Installation & User Guide Model: RD20-24
Radiance Series Chassis: RD20-24 ______ 2-slot DIN rail chassis with DC power R5000-17HS ___ 17-slot 2U chassis with AC or DC power R1000-xxx _____ 2-slot 1U chassis with AC and/or DC power R400-2HS-1A __ 2-slot chassis with external AC power R200-xx _______ 1-slot chassis with AC or DC power The following is a listing of additional products in the Metrobility Radiance series. Refer to each product’s specific installation and user guide for operational features.
Table of Contents Radiance DIN Rail Mounted Chassis Installation & User Guide Overview .............................................................................................................. 4 Installation Guide ............................................................................................... 6 Unpack the Chassis and Accessories ..................................................... 6 Remove Protective Film .........................................................................
Overview The Radiance DIN Rail Mounted Chassis is a two-slot, dual DC powered chassis ideal for industrial and automation applications which may be migrating to Optical Ethernet. The chassis, which operates between -20º and 70ºC, is convection cooled and requires no fans. Its two redundant 24-volt DC power inputs ensure nonstop operation. If one power supply fails, the other automatically provides the entire power load for the unit.
• Fast and easy installation compliant with DIN 46 277 and DIN EN 50 022 mounting specifications. • Rugged industrial enclosure with bright zinc chromate finish. Related Documentation Refer to the enclosed documentation CD-ROM or go to Metrobility’s website (www.metrobility.com/support/manuals.htm) to view product manuals for the Radiance series.
Installation Guide Follow the simple steps outlined in this section to install and start using the Radiance DIN Rail Mounted Chassis. NOTE: Electrostatic discharge precautions should be taken when handling any line card. Proper grounding is recommended (i.e., wear a wrist strap).
3 Mount the Chassis A clip is provided on the back of the chassis for mounting onto a DIN rail. DIN Rail Clip + + Rear View To mount the chassis, hook it onto the DIN rail with the top of the clip, as shown below. The chassis will hang down. Push to Snap in Place DIN Rail Gently push the chassis toward the rail to snap it in place. A “click” sound verifies that the attachment is secure.
4 Install the Line Cards The Radiance DIN rail mounted chassis supports any two single-slot interface line card or one double-slot redundant interface line card. Radiance line cards offer the ease of plug-and-play installation and are hot-swappable. Before installing any card, note the following: • Set all switches and/or jumpers on the line card. Refer to the card’s user guide for detailed configuration instructions. • A blank panel is installed in the chassis.
5 Connect to the Network Connecting the Line Cards To connect the individual line cards to the network, refer to their corresponding installation and user guides. Connecting the Management Line Card If a management line card is installed in your chassis, follow the procedure below to connect to the network. The management line card supports 10Base-T Ethernet. • Using a standard Category 3 or 5 UTP cable, connect Port 1 on the management card to your network.
6 Apply Power to the Chassis IMPORTANT • Turn off the DC voltage source before beginning. • Connect the wire leads to the chassis before applying power. The DIN rail chassis provides two input power supply connections, PWR A and PWR B. The two power supplies support redundant power, however, there is no load distribution. With redundant power, if the source to PWR A or B fails, the other source automatically provides the entire power load for the chassis.
User Guide This section contains more information regarding the Radiance DIN Rail Mounted Chassis. Management Line Card The management card is the SNMP agent for the Radiance chassis. Connected via the backplane to the other line card in the chassis, the management card reports individual board status to Metrobility’s NetBeacon software (version 3.6 or higher) or any SNMP application. Thus, the network administrator receives immediate information on network operations via a PC.
Topology Solutions Metrobility’s DIN rail chassis and media conversion line cards support a variety of industrial and automation applications including: • Interconnection of Ethernet PLCs, operator interface, and motion control • Ethernet I/O • Machine monitoring • Environmental control • Test and measurement • Process control • Remote data acquisition • Communications gateway Basic Copper to Fiber Connectivity 10 Mbps MDF / IDF 10/100 10BASE PWR FD PWR Office Ethernet AUI to RJ-45 Transceiver LK AT
10/100 CNC, PLC, etc. 10/100 Four Port Switch CNC, PLC, etc. MDF / IDF 10/100 BASE 100 BASE PWR PWR R133 R104 TP 1 LK RX 10/100 Mbps AT LK 2 TX FX 100 Mbps LK RX 3 LK AT TX MM or SM Fiber 4 10/100 RD20-24 Chassis CNC, PLC, etc. Managed Remote Links AUI to RJ-45 Transceiver 100 BASE AUI MDF / IDF CNC, PLC, etc.
Technical Specifications Power Input: _________________________________ 24 V DC (SELV) ±20%, 0.75 A Environmental Operating Temperature __________________________________ -20º to 70º C Storage Temperature ____________________________________ -30º to 70º C Relative Humidity _________________________ 5% to 95% non-condensing Physical Case ___________ 20 Ga CRS (cold rolled steel) exterior construction _____________ 18 Ga 5052-H32 aluminum interior construction Dimensions ______________________________ 5.
Abbreviations and Acronyms A Amps AUI Attached Unit Interface CNC Computerized Numerical Control IDF Intermediate Distribution Frame I/O Input/Output Mbps Megabits per second MDF Main Distribution Frame MM Multimode PLC Programmable Logic Controller PWR Power SELV Safety Extra Low Voltage SM Singlemode SNMP Simple Network Management Protocol UTP Unshielded Twisted Pair V DC Volts, Direct Current Radiance DIN Rail Mounted Chassis 15
Product Safety, EMC and Compliance Statements This equipment complies with the following requirements: Product Safety DIN Compliance • UL • DIN 43 880 • cUL • DIN 46 277 • CE • DIN EN 50 022 Emissions • FCC Part 15 Class A • DOC ICES-03 Class A • EN55022 Class A • EN55024: 1998 • CE This product shall be handled, stored and disposed of in accordance with all governing and applicable safety and environmental regulatory agency requirements.
Warranty and Servicing Three-Year Warranty for the Radiance DIN Rail Mounted Chassis Metrobility Optical Systems, Inc. warrants that every Radiance DIN Rail Mounted Chassis will be free from defects in material and workmanship for a period of THREE YEARS from the date of Metrobility shipment. This warranty covers the original user only and is not transferable.
Product Manuals The most recent version of this manual is available online at http://www.metrobility.com/support/manuals.htm To obtain additional copies of this manual, contact your reseller, or call 1.877.526.2278 or 1.603.880.1833 Product Registration To register your product, go to http://www.metrobility.com/support/registration.asp 25 Manchester Street, Merrimack, NH 03054 USA tel: 1.603.880.1833 • fax: 1.603.594.2887 www.metrobility.
