Troubleshooting guide

Copyright © 4/20/2006 Travis Industries, Inc.
8
Control Board Operation
The Two Modes of
Operation:
Manual
Manual mode requires the user
to turn the heater on and off
manually.
Auto (requires a thermostat)
Auto mode allows you to use a
thermostat to control room
temperature. The stove
automatically turns on when the
temperature drops below the
thermostat setting. Once the
stove reaches operating
temperature, the stove then runs
at the heat output setting
selected.
Switching
Modes While in Operation
Whenever the stove is switched
from one mode to another while
in operation, the stove will enter
the "start-up" sequence for a
minimum of 20 minutes.