Owner manual

5.6.3 SUBSTANCES
746 VA Trace Analyzer / 747 VA Stand
5-147
Method: XXXXXXXX SUBSTANCES
........ - XXXXXXXX
Calibration XXXX-XX-XX XX:XX Coefficients
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Technique cal.crv. Y.offset ..........
Curve type ......... Slope ..........
Temperature .........°C Nonlin. ..........
Mean dev. ..........
Range min .........g/L # CSoln.name Mass conc.
Range max .........g/L ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
0 ........ .........g/L
M.conc./cm .........g/L 1 ........ .........g/L
M.conc.begin ......... 2 ........ .........g/L
3 ........ .........g/L
V0.CSoln. .........mL 4 ........ .........g/L
5 ........ .........g/L
6 ........ .........g/L
7 ........ .........g/L
8 ........ .........g/L
9 ........ .........g/L
Modify
column
Modify
line
Select
subst.
Link to
segment
Delete
subst.
Subst.
name
>>
Softkeys Meaning
Meaning of the softkeys F1...F7, see page 130
>>
Switching to subpage "Substance parameters"
Switching to the subpage "Substance parameters" with the parame-
ters for substance recognition, baseline calculation, scaling and
evaluation.
Parameter Range; Default value / Meaning
Calibration
XX-XX-XX XX:XX
display only
Date of calibration
Date and time of the calculation of the calibration curve.
Technique none, std.add., cal.crv., int.std.; none
Calibration technique = Calibration curve (cal.crv.)
The relation between the mass concentration Mass conc. of a sub-
stance and the evaluation value EV is determined by a calibration
curve established by measurement of different standard solutions
(see section 6.9.5).
23
2019
2019