Owner manual

5.7 Program instructions

746 VA Trace Analyzer / 747 VA Stand

5-220

CSWEEP) Page: S Stand: M, A Abbreviation: CSW

Instructions t/s Main parameters Auxiliary parameters

––––––––––––– ––––– ––––––––––––––––––––––––– –––––––––––––––––––––––––

## .. CSWEEP)

Function End of the block for a cyclic voltage sweep.

Description The CSWEEP) instruction ends a block in a segment in which the ramps

for the cyclic voltage sweep are defined. This block can contain

maximum 5 RAMP instructions, other instructions are not allowed.

Comments see (CSWEEP

Example see RAMP