Owner manual

5.7.3 Alphabetical instruction list

746 VA Trace Analyzer / 747 VA Stand

5-251

Description The PADD>M instruction is used for the automatic or manual addition of

standard addition solutions. In contrast to the ADD>M instruction, the

standard addition volume V.add can not be preallocated, but is

recalculated in every measurement from the evaluation value EV:<subst>

measured beforehand for any substance and a proportionality coefficient

Prop.coeff..

The automatic addition can be performed with a 685 Dosimat, a 700

Dosino or directly with the 695 Autosampler. The appropriate position of

the standard addition solution must be specified on the "SOLUTIONS"

page (see Soln.name)

Comments • The PADD>M instruction must be located within an ADD loop.

• In the last execution of the ADD loop, the PADD>M instruction is no

longer executed.

• On execution of the PADD>M instruction with a 685 Dosimat or 700

Dosino, a wait is made until the addition is complete before the

instruction following PADD>M is executed.

Example see (CASE