Owner manual

5.7 Program instructions

746 VA Trace Analyzer / 747 VA Stand

5-258

PRINT Page: O, S Stand: M, A Abbreviation: PR

Instructions t/s Main parameters Auxiliary parameters

––––––––––––– ––––– ––––––––––––––––––––––––– –––––––––––––––––––––––––

## .. PRINT ..... ....................................................

Function Printout of a message.

Parameter Range; Default value / Meaning

Remark 52 characters; -

Message which is printed out

The comment entered here is printed out on the printer followed by CR

and LF.

All numbers, letters and characters available on the keypad can be

printed out, in addition the entry of all ASCII characters with decimal

code 032…255 is possible (see section 5.2.3). Printout of the special

characters with decimal code 000…031 is not allowed as they are used

as control characters for the printer.

Description The PRINT instruction is used to put out the message entered in the

Remark parameter on the built-in thermal printer or the external printer

connected to the parallel interface.

Comments If a message should be printed out on an external printer attached to one

of the two RS232 interfaces, the SEND>RS1 or SEND>RS2 instructions

must be used.