Owner's manual

5 Determination mode
757 VA Computrace – Software
96
Edit determination method parameters
DETERMINATION CURVES / Edit /
Determination method parameters
Open the
EDIT DETERMINATION METHOD PARA-
METERS
window for viewing and modifying the
parameters of the determination method used to
record the determination. This window contains
the tabs
Specifications
,
Determination
,
Voltammet-
ric
,
Substances
and
Calculations
. If parameters in
the
EDIT DETERMINATION METHOD PARAMETERS
window are changed and
<OK>
is pressed, the
determination will be recalculated automatically.
Note: These parameters will not automatically be used for the
next measurement. To do this, use the
Copy parameters to working
method
command (see section 5.3).
Specifications
The
Specifications
tab of the
EDIT DETERMINATION METHOD
PARAMETERS
window contains the main specifications of the de-
termination method. Only
Title
,
Remark1
and
Remark2
can be ed-
ited.