Owner's manual

2.3 File menu
757 VA Computrace – Software
15
MAIN WINDOW / File / Save determination as ...
Save the current determination loaded in the
working memory in a new file. Enter name and di-
rectory for storage of the determination file.
MAIN WINDOW / File / Export determination points
Save the measurement points of all sweeps of
the current determination loaded in the working
memory into a data file (extension
*.txt
). This data
file contains a block of the used method parame-
ters followed by the sweep blocks of X and Y val-
ues each preceded by VR number and number
of measurement points. The data files can be
imported into spreadsheet programs like Micro-
soft Excel.
757 VA COMPUTRACE / File / Export results ...
Save the results report of the current determina-
tion loaded in the working memory into an ASCII
file (extension
*.txt
). This file can be imported into
spreadsheet programs like Microsoft Excel.
Signal files
Signal files (
*.sig
) contain the measurement data and specifi-
cations of a signal recorded in the exploratory mode. They can
only be loaded or saved in this mode.
MAIN WINDOW / File / New parameters
Load default parameters for selected electrode
and measurement mode.
MAIN WINDOW / File / Load signal
Load an existing signal file. Normally, signal files
are stored in the
Data
folder.
MAIN WINDOW / File / Save signal as ...
Save the current signal loaded in the working
memory in a new file. Enter name and directory
for storage of the signal file.
MAIN WINDOW / File / Export signal points
Save the measurement points of the sweep of
the current signal loaded in the working memory
into a data file (extension
*.txt
). This data file con-
tains a block of the used method parameters fol-
lowed by the sweep block of X and Y values pre-
ceded by the number of measurement points.
The data files can be imported into spreadsheet
programs like Microsoft Excel.