Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
107
The following table indicates the balance type that needs to be selected
for the balance model:
Balance Balance type
AND AND
Mettler AB, AE, AG, AM,
AJ, PE, PM, PJ, PR, XP, XS
Mettler
Mettler AT Mettler AT
Mettler AX, MX, UMX, PG,
AB-S, PB-S
Mettler AX
Ohaus Voyager, Explorer,
Analytical Plus
Ohaus
Precisa Precisa
Sartorius Sartorius
Shimadzu BX, BW Shimadzu
11.9 USB/RS-232 adapter
List of devices: USB/RS-232 adapter ▶ Edit ▶ COM interface ▶ Edit
As a rule, balances are equipped with a serial RS-232 interface. To con-
nect a balance, you will require the 6.2148.050 cable. You can adjust the
interface parameters in the dialog Edit device / Port parameters. These
settings must match the settings on the connected device.
NOTE
If you make changes to parameter settings in this dialog, then you must
switch the Ti-Touch off and back on in order for the changes to take
effect.