Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 Methods
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
165
Modifying sample data
This instruction is for the purpose of clarifying the settings which are pos-
sible in this dialog. The following settings should be made:
￭ Change the designation for the input field of the first sample identifica-
tion.
￭ Hide the input field for the second sample identification.
￭ Define a fixed sample size.
Proceed as follows:
1
Change the designation for the input field
￭ Tap on the input field Identification 1.
The text editor opens.
￭ Change the designation in Batch and confirm with [OK].
￭ Deactivate the parameter Identification 2.
2
Define a fixed sample size
￭ Activate the parameter Fixed sample size.
￭ Enter the value 10 mL as Sample size.
3
Display the main dialog
Tap on the fixed key [ ].
The data is saved and the adjusted main dialog appears.
Only Identification 1 is shown with the title "Batch." The fixed sample
size "10 mL" is shown, but cannot be edited.