Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 Methods
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
167
16.5.4 Method properties
Main dialog: Edit parameters ▶ Method options ▶ Properties
Detailed information concerning the method is displayed in the dialog
Method options / Properties.
￭ Method status
Current status of the method.
– new
The method has been newly created and not yet saved.
– saved
The current method has been saved.
– modified
The current method has been modified.
￭ Created by
User who created the method.
￭ Created on
Date and time at which the method was created.
￭ Last saved by
User who saved the method most recently.
￭ Last saved on
Date and time at which the method was most recently saved. The ver-
sion of the method is displayed as well. The version number will be
increased by one each time the file is saved.
16.5.5 Note
Main dialog: Edit parameters ▶ Method options ▶ Note
In this dialog, you can enter a short text, e.g. important information about
carrying out the determination.
[Display options]
Definition when the note is being displayed.
Automatically after loading the method
on | off (Default value: off)
If this parameter is activated, the note is displayed when loading the
method. It can otherwise only be read in this dialog.
16.5.6 Saving a determination automatically
Main dialog: Edit parameters ▶ Method options ▶ Save automat.
In the dialog Method options / Save automatically, you can specify
whether the determination is to be saved automatically and/or whether a
PC/LIMS report is to be created.