Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

27 Manual control

915 KF Ti-Touch

￭￭￭￭￭￭￭￭

235

27.2 Measuring

Manual control ▶ Measure

Manual measurements can be carried out with the function [Measure].

Proceed as follows:

Select a sensor

￭ Select the desired sensor from the sensor list.

All of the sensors available in the sensor list are displayed. Sensors

are defined under System ▶ Sensors.

￭ Select the measuring input at which the sensor is connected.

Select a measuring mode

￭ Select the desired measuring mode.

Only those measuring modes are displayed which are advisable

for the selected sensor.

Enter a measuring temperature

￭ Enter the measuring temperature if no temperature sensor is con-

nected. If a temperature sensor is connected, then the tempera-

ture will be measured automatically.

Start the measurement

￭ Tap on [Start].

The measured value display is opened: