Instruction Manual

27.3 Dosing
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
242
￭￭￭￭￭￭￭￭
915 KF Ti-Touch
You can dose a particular volume with the [Dosing fixed vol.] function.
Proceed as follows:
1
Configure the dosing function
NOTE
￭ The dosing and filling rates should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rates depend on the cylinder
volume (see Chapter 31, page 338).
￭ Enter the desired volume.
￭ Enter the dosing rate.
￭ Enter the filling rate.
2
Start dosing
￭ Tap on [Start].
The volume display is shown. When the volume of one cylinder has
been dosed, the dosing cylinder will be refilled automatically.