Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Parameters
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
315
Input signal
Selection of the signal out of the templates or entering the required bit
pattern. Templates are defined under System ▶ Templates ▶ Input
lines.
Entering a bit pattern:
￭ 0 = line inactive
￭ 1 = line active
￭ * = retain line status
The input lines are always numbered from right to left, i.e. with the signal
*******1 line 0 is expected to be active.
NOTE
We recommend masking lines that are of no interest or for which no
defined condition can be predicted with an asterisk (*).
Entry
Bit patterns containing exactly 8 characters
or a max. of 24 characters for the name of
the template
Default value ********
Selection Selection of the templates defined
Timeout
When this time interval has expired without recognizing the remote signal,
the action defined in the following is triggered.
Input range 0 - 999 s
Default value 0 s
Action
Selection of the action which is carried out when the time interval has
expired.
Selection Display message | Document message | Cancel
determination
Default value Display message
For all three options it is documented in the deter-
mination data (see dialog More determination
data / Messages), that the time interval has been
expired.
Display message
A message is displayed. You can select whether you want to continue
with the determination or cancel the run.