Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
31 Appendix
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
343
Assignment Pin No. Function
Output 13 20
0 volts / GND 14
+5 volts 15
0 volts / GND 25
Table 9 Explanation of the individual functions
Function Explanation
Start The current method is started at the time of acti-
vation.
t
pulse
> 100 ms
Stop The current method is canceled (Stop) at the time
of activation.
t
pulse
> 100 ms
Quit The current command in the determination run
will be canceled at the time of activation.
t
pulse
> 100 ms
Ready The instrument is ready to receive a start signal.
Conditioning OK The line is set when Conditioning with KFT titra-
tion is at OK. The line remains set until the deter-
mination is started with [START].
Determination The instrument performs a data-generating
determination.
EOD End of Determination.
Pulse (t
pulse
= 200 ms) after a determination.
Error The line is set for error message display.
Warning The line is set for warning message display.