Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
75
11.1 Adding a new device
Of the following device types, you can enter one device each in the device
list, even if it is not yet connected:
￭ USB Sample Processor
￭ Balance
￭ Barcode reader
￭ USB/RS-232 adapter
￭ PC keyboard
Proceed as follows to do this:
1
Displaying the device selection
Tap on [New].
2
Selecting the instrument
Tap on the button for the desired device.
The new device is entered in the list.
11.2 Configuring the instrument
Instrument list: Instrument ▶ Edit
The data stored for an instrument depends on the type of instrument. You
can define an instrument name and a comment for each instrument. The
instrument name of the Ti-Touch is printed out in the standard report
header.
The description of the individual instruments can be found in the follow-
ing specific chapters:
￭ Ti-Touch (see Chapter 11.3, page 76)
￭ Metrohm control instruments (see Chapter 11.4, page 82)
￭ USB Sample Processor (see Chapter 11.5, page 85)
￭ Printer (see Chapter 11.7, page 101)
￭ Balance (see Chapter 11.8, page 106)
￭ PC keyboard (see Chapter 11.10, page 109)
￭ USB/RS-232 adapter (see Chapter 11.9, page 107)
￭ Barcode reader (see Chapter 11.11, page 110)