Instruction Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

11 Device manager

915 KF Ti-Touch

￭￭￭￭￭￭￭￭

￭ Properties of the peripheral devices on the MSB connector (see Chap-

ter 11.4.3, page 85)

11.4.1 Properties – Measuring input

List of devices: Control device ▶ Edit ▶ Measuring input 1 ▶ Proper-

ties

In this dialog, you define the type of temperature sensor you have con-

nected to the selected measuring input.

ADC type

Type of analog-digital converter.

Serial number

Serial number of the measuring interface.

Thick film type

Type of the thick film.

Temperature sensor

Type

The instrument supports the use of two different temperature measure-

ment techniques:

￭ NTC (Negative Temperature Coefficient)

￭ Pt1000 (Platinum resistance)

Select here the type that has been connected to the instrument. If an NTC

sensor is used, then it is also necessary to enter two sensor characteristics.

These characteristics are listed in the specifications of the sensor.

Selection Pt1000 | NTC

Default value Pt1000