User Manual

Subwindow Run 121
Device assignment
If at the Start test it is discovered that no device has been assigned for a device-
specific command then the window
Device assignment appears for assigning the
device:
Command type
Shows the command type.
Command name
Shows the command name.
Device type
Shows the device type selected in the command.
Device name
Device name
Selection of a device from the device table. Only those devices being able
to execute the command are selectable.
Properties
The properties for the tab Single determination are set on the following 3 tabs:
•
Display
Defines the columns to be shown on the tab
Single determination.
•
Process
Options for processing single determinations.
•
Data import
Switches the import of external data on and off for the fields on the tab
Single determination.
Display
Defines the operating elements and columns to be shown on the tab Single deter-
mination
.
Operating elements
[Hold] / [Cont]
[ on ], off
Switches the display of the operating buttons
[Hold] and [Cont] on and off.