User Manual

138 Workplace
Save sample table
Name
50 characters
Entry of the name under which the working sample table is to be saved.
Note
The name of the sample table must be unique in the whole client/server system.
Save the sample table under the required name.
Run test
On the tab Single determination with the or menu item Tools, Run test the Start
test for the method defined under
Method can be carried out. A requirement is that
the workplace is in the
READY status.
Method
Shows the method for the single determination.
Status display
One of the following status displays appears beneath the line number:
Run test running...
This display appears when the test sequence is running. A progress bar
also appears; the test can be canceled with
beside the bar.
Run test error
This display appears when an error occurs during the run test. In a determi-
nation series the user can determine to which line the error message pro-
duced by the error and shown in the normal message window belongs by
using the line number.
Run test stopped manually
This display appears when the run test is canceled manually by the user.
Run test finished without errors
This display appears at the end of an error-free run test.
Print sample table (PDF)
With the menu item Sample table, Print (PDF)... on the tab Determination series the
window
Print sample table (PDF) opens, in which the output format for the PDF
output can be selected.
Orientation
Portrait
[ on ], off
Output in portrait format.
Landscape
[ on ], off
Output in landscape format.