User Manual

Commands 371

•

Additional measured values

Definition of additional measured values of other measuring com-

mands which are saved as additional column in the list of measuring

points.

General/Hardware

Screenshot and parameters: see DET pH - General/Hardware

Start conditions

Screenshot and parameters: see DET pH - Start conditions

Titration parameters

Parameters defining the run of the titration.

Command name

25 characters, [ MET pH # ]

Name of the command.

Titration rate

Three predefined sets of parameters can be selected for the titration rate:

slow, optimal and fast. For these sets the parameters for the Measured value

acceptance

and Dosing of increments are not displayed. In order to edit these

parameters the value

user must be selected.

slow

For titrations in which the finest details are also to be visible. However, this

can also increase noise and lead to the production of unwanted EPs.

[ optimal ]

Parameter set for all standard titrations; optimized for the most frequent

applications.