User Manual

26 General program functions
Identifier Description Commands
.IGF
Initial gas flow (measured value at start of command)
in mL/min
MEAS T/Flow
.IME
Initial measured value (measured value before proc-
essing the start condition) in the units of the measured
value
DET, MET, SET, KFT,
STAT, MEAS, CAL
MEAS, STDADD, DOS
.ITE
Initial temperature (temperature before processing the
start conditions) in °C
DET, MET, SET, KFT,
STAT, MEAS (without
T/Flow), CAL MEAS,
STDADD, DOS
.LCO
Loop counter = current number of completed loops
both for Repeat and While loops
LOOP, CAL LOOP
.LP.CAx
Calculated value x (1...3) for the last measuring point DET, MET, SET, KFT,
KFC, STAT, MEAS, DOS
.LP.CHA
Charge for last measuring point in mA·s KFC
.LP.DME
Difference in measured values for last measuring point MET
.LP.DVT
dV/dt for the last measuring point (SET, KFT, STAT,
DOS) or drift for last measuring point in µg/min (KFC)
SET, KFT, KFC, STAT,
DOS
.LP.ERC
ERC for last measuring point DET
.LP.EXx
External value x (1...3) for last measuring point DET, MET, SET, KFT,
KFC, STAT, MEAS, DOS
.LP.GFL
Gas flow value for last measuring point in mL/min MEAS T/Flow
.LP.IGE
Current pulse current for last measuring point in mA KFC
.LP.MEA
Measured value for last measuring point in the units of
the measured value
DET, MET, SET, KFT,
KFC, STAT, MEAS, CAL
MEAS, DOS
.LP.QTY
Measured value (water) for last measuring point in µg KFC
.LP.TEM
Temperature for last measuring point in °C DET, MET, SET, KFT,
STAT, MEAS, CAL
MEAS, DOS
.LP.TIM
Time for reaching last measuring point in s DET, MET, SET, KFT,
KFC, STAT, MEAS, CAL
MEAS, DOS
.LP.UGE
Potential at generator electrode for last measuring
point; 0 = not defined, 1 = <14 V, 2 = 14...28 V,
3 = >28 V
KFC
.LP.VOL
Volume for last measuring point in mL DET, MET, SET, KFT,
STAT, DOS
.LPO
Current absolute lift position in mm (entry at end of
command)
LIFT
.LST
Start time of loop command (
Date/Time) LOOP, CAL LOOP
.MA.GFL
Maximum gas flow in mL/min MEAS T/Flow
.MA.MEA
Maximum measured value in the units of the measured
value
DET, MET, SET, KFT,
STAT, MEAS
.MA.TEM
Temperature for maximum measured value in °C DET, MET, SET, KFT,
STAT, MEAS
.MA.TIM
Time for reaching the maximum measured value in s DET, MET, SET, KFT,
STAT, MEAS