User Manual

Commands 533
EMPTY
Command for emptying cylinder and tubing of a dosing unit.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 855
Dosing Interface: 846
Sample Processor: 778, 789, 814, 815, 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command
EMPTY are configured in the following dialog
window:
•
EMPTY
EMPTY - properties
Command name
25 characters, [ Empty # ]
Name of the command.
Device
Device name
Device name, [ not defined ]
Selection of a device from the device table. Only those devices being able
to execute the command are selectable. Additionally,
not defined can be se-
lected. In this case, the device name must be assigned by the user at the
start of the method.
Device type
Device types, [ Titrando ]
Display or selection of the device type. If a device is selected under
Device
name
, this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.
If the option
not defined is selected as Device name, all device types being
able to execute the command can be selected independently from the de-
vices in the device table.