User Manual

570 Method
RECEIVE - event/state
Command
Command
Name of the command whose event message is waited for.
Event message
Event message, [ 'empty' ]
Selecting the event message/status to be waited for. The following event
messages and status can be selected:
Event/Status Type Meaning Commands
Start
Event Command has been started. All
End
Event Command has been finished. All
Dosing
Event The dosing of the titration has been started.
DET, MET
Measure
Event The measurement of the titration has been started.
DET, MET
Busy
Status System is in condition
BUSY, HOLD or ERROR. All
Finished
Status Command has been finished at least once. All
Cond
Status
Conditioning is running (
COND BUSY or COND HOLD); the
Start drift has not yet been reached.
SET, KFT, KFC
Condok
Status
System is conditioned (
COND READY); the Start drift has
been reached.
SET, KFT, KFC
Note
An event can only be received if the RECEIVE command has been started be-
fore the event it is waiting for whereas a status can be scanned anytime.
Comment
250 characters, [ 'empty' ]
Comment about the event message.