User Manual

Configuration data 625

* = any line condition, and

= set pulse

The output lines and bits are numbered from right to left:

Output 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Bit 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Example:

************1* sets output line 1 to active (= set) which, e.g.,

would be a stop command for a connected Titrino.

************0* sets

the line to inactive.

Note

We recommend that all the non-relevant output lines are masked with an asterisk

so that the conditions of these lines are not altered.

Pulse length

100 ... [ 200 ] ... 1000 ms

Duration of the transmitted pulse.

Examples for 765 Dosimat

Parameter Bit-pattern Function

Start Dos1 *******p******

Starts Dosimat 1 (Titrino via "activate")

Start Dos2 *****p********

Starts Dosimat 2 ( " )

Start Dos* *****p*p******

Starts Dosimats 1 and 2 ( " )