User Manual

788 How to proceed
7.8.3 Load working sample table
1. Select program part Workplace.
2. In subwindow
Run, click on tab Determination series.
3. Click on menu item
Sample table, Load... in subwindow Run.
The window
Load sample table opens.
4. Select desired sample table anc click on [Load].
The sample data of the selected sample table is loaded into the working sample
table.
7.8.4 Edit working sample table
1. Select program part Workplace.
2. In subwindow
Run, click on tab Determination series.
3. If desired, load existing sample table into working sample table.
4. Click on menu item
Sample table, Properties... in subwindow Run.
The window
Properties - Determination series opens.
5. Define properties for the determination series and close the window with
[OK].
6. Select desired line to be changed in subwindow
Run.
7. Click on menu item
Edit, Edit line in subwindow Run.
The window
Edit line - Working sample table opens.
8. Select
Method out of the desired method group, enter Sample position, sample
identifications
ID1...ID8, Sample size and Sample size unit and click on [Apply].
The current sample data will be entered in the corresponding line of the working
sample table.
9. Repeat step 8 for each desired determination.
10. Close window
Edit line - Working sample table with [Close].
11. Click on menu item
Sample table,Save as... in subwindow Run.
The window
Save sample table opens.
12. Enter desired name in the field
Name and click on [Save].
The working sample table is saved under the required name as sample table.