User`s guide

Chapter
5
BASIC
Com
mands
115
Set / Get Group: @GP RF Base (433 MHz only)
Purpose
To set or get the Base’s group.
Syntax
@GPbbg\r
bb: Base ID (01 ~ 16)
g: New group (1 ~ 3); set 0 to get the Base’s group.
Return
@GPbbGoGn\r
bb: Base ID (01 ~ 16)
Go: Original group (1 ~ 3)
Gn: New group (1 ~ 3)
Header of Data Packets: @HD RF Base
Purpose
To enable or disable the header of a data packet. By default, the data received will
be prefixed with “@DTbbtt”, where bb refers to Base ID and tt refers to Terminal
ID. If the header is disabled, there will be no prefix at all.
Syntax
@HDbbc\r
bb: Base ID (01 ~ 16)
c: set 0 to disable the header; set 1 to enable the header (default: enable)
Return
@HDbbCoCn\r
bb: Base ID (01 ~ 16)
Co: Original setting (1~ 4)
Cn: New setting (1 ~ 4)
Change ID: @ID RF Base
Purpose
To change the Base ID.
Syntax
@IDbbBB\r
bb: Original Base ID (01 ~ 16)
BB: New Base ID (01 ~ 16)
Return
@IDbbBB\r
bb: Original Base ID (01 ~ 16)
BB: New Base ID (01 ~ 16)