Installation guide

12
DESIGN SPECIFICATIONS
IS4800 Series Engine
Operational
Light Source: Visible Laser Diode (VLD) @ 650 nm
Laser Power: 1 mW
Depth of Scan Field:
50 mm – 254 mm (2" – 10") for
0.33 mm (13 mil) bar codes
Width of Scan Field:
74 mm (2.9") @ 50 mm (2.0");
290 mm (11.4") @ 254 mm (10.0")
Scan Speed: 100 Scan Lines per Second Typical
Scan Pattern: Single Scan Line
Minimum Bar Width: 0.127 mm (5.0 mil)
Print Contrast: 35% Minimum Reflectance Difference
Number Characters Read: Decode Dependent
Roll, Pitch, Yaw 42°, 68°, 52°
Mechanical
Dimensions (maximum):
24.7 mm x 14.6 mm x 11.9 mm
(.97" x 0.57" x 0.47")
Weight (maximum): 11 g (0.39 oz)
Termination: 10-pin ZIF Connector
Mounting:
2 Mounting Points,
M1.6 mm Threaded, 2 mm Maximum Depth
Locators:
2 Locating Points,
0.8 mm Diameter, 1.0 mm Depth
Specifications are subject to change without notice.