User`s guide

INSTALLATION

RS485

Turn off the host device.

2. Plug the male 10-pin RJ45 end

of the MVC cable into the

10-pin socket on the MS7120.

3. Connect the other end of the MVC

cable to the host device.

4. Turn on the host device.

Figure 10.

hen the scanner first receives power, the blue and white LED will

toggle on and off then the scanner will beep once.

Plugging the scanner into the serial port of the PC does not

guarantee that scanned information will a

ppear at the PC. A software

driver and correct configuration setting are also required for proper

communication to occur.