User Manual

www.eauto.si [e-mail] [phone]
GET STARTED
INTRODUCTION
METRON EV portable chargers PC04 and PC05
are designed to charge electric vehicles equipped
with Type 2 charging sockets (European standard)
from any standard industrial socket (e.g. 1-phase or
3-phase CEE sockets). Where’s the in-line “bulky box”?
Metron portable chargers are truly unique because
all the charging station electronics is placed inside
Type 2 charging plug itself!
First plug the portable charger in the wall outlet.
Immediately signal LED starts blinking: number of
blinks tells you what is the saved power setting (see
the next page). Afterwards LED glows constantly till
AC power is present indicating standby/ready status.
The biggest advantage of this design is the fact that
METRON portable chargers don’t have that heavy
in-line “bulky box” as others do, what makes them
lighter, easier to install/connect and also easier to
store in a carrier case. METRON portable chargers
also offer the possibility to set desired charging
current/power by simply pressing a button.
When you plug it into the vehicle Type 2 socket it
starts blinking slowly which means the vehicle is
charging. When your electric vehicle is fully charged
the LED glows constantly again.
1
USER MANUAL
PC04, PC05
EV Portable Chargers