User Manual

2
NASTAVITEV ŽELENEGA POLNILNEGA TOKA/MOČI
Number of
LED blinks
1 6 A / 1,4 kW
2 8 A / 1,8 kW
3 10 A / 2,3 kW
4 13A / 3,0 kW
5 16A / 3,7 kW
6 20A / 4,6 kW
7 25A / 5,8 kW
8 32A / 7,4 kW
Number of
LED blinks
1 3 x 6 A / 4,1 kW
2 3 x 8 A / 5,5 kW
3 3 x 10 A / 6,9 kW
4 3 x 13A / 9,0 kW
5 3 x 16A / 11,0 kW
PC05
PC04
LED light
Push Button
New charging current/power setting is stored in the memory and it stays the same (even
after the power supply is not present anymore) until the next setting change is performed.
SETTING THE DESIRED CHARGING CURRENT/POWER
METRON portable chargers allow user to set desired charging current/power, before being plugged in the
electric vehicle Type 2 socket, or even while the vehicle is charging! Procedure is simple:
• press and hold the push button: LED switches off immediately
• after 5 seconds LED starts blinking slowly
• Releasing the push button after a certain number of blinks determines charging
current/power as follows:
Charging
current/power
Charging
current/power
STATUS NOTIFICATION BY LED BLINKS
LED STATUS NOTIFICATION
Slow blinking when power supply is applied
Constantly on when not plugged in
Slow blinking when plugged in
Constantly on when plugged in
Indicating previous saved current setting
Stand-by / Ready to charge
Charging
Electric vehicle fully charged