Instruction manual

Advanced Settings
31
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item Default Value Setting Details
Front Left 0.0dB
Select a value between -12.0dB" to "+12.0dB (in
0.5dB increments). A test tone will be output each
time you change the value. Select the desired level.
Wide Left 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
r
The setting cannot be changed if "Speaker Settings"
- "Front Speakers Type" is set to "Bi-AMP".
Center 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
Wide Right 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
r
The setting cannot be changed if "Speaker Settings"
- "Front Speakers Type" is set to "Bi-AMP".
Front Right 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
Surround Right 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
Back Right 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than "None"
and also "Back ch" is set to other than "1ch".
r
In the following cases, the setting cannot be
changed:
– "Speaker Settings" - "Powered Zone 3" is set to
"Yes", and ZONE2 and ZONE3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is
set to "Normal“ or "Passive Subwoofer" is set
to "Yes", "Powered Zone 2" is set to "Yes" and
ZONE2 is set to on.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-AMP".
Setting Item Default Value Setting Details
Back Left 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than "None"
and also "Back ch" is set to other than "1ch".
r
In the following cases, the setting cannot be
changed:
– "Speaker Settings" - "Powered Zone 3" is set to
"Yes", and ZONE2 and ZONE3 are set to on.
– "Speaker Settings" - "Front Speakers Type" is
set to "Normal“ or "Passive Subwoofer" is set
to "Yes", "Powered Zone 2" is set to "Yes" and
ZONE2 is set to on.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-AMP".
Back 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
r
The setting is displayed only if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r
The setting cannot be changed if "Speaker Settings"
- "Front Speakers Type" is set to "Bi-AMP".
Surround Left 0.0dB Select a value between -12.0dB" to "+12.0dB. A
test tone will be output each time you change the
value. Select the desired level.
Subwoofer 1 0.0dB Select a value between "-15.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
r
The setting cannot be changed if "Speaker
Configuration" - "Subwoofer" is set to "None".
Subwoofer 2 0.0dB Select a value between "-15.0dB" to "+12.0dB". A
test tone will be output each time you change the
value. Select the desired level.
r
The setting cannot be changed if "Speaker
Configuration" - "Subwoofer" is set to "1ch" or
"None".