Instruction manual

Advanced Settings
49
Setting Item Default Value Setting Details
NET Zone2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
trigger out jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone 2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone 2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone 3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone 3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone 2/Zone 3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"Main/Zone 2/Zone 3": Will be output when
selected as input source of main room, Zone
2 or Zone 3 playback
USB Zone2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
trigger out jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone 2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone 2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone 3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone 3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone 2/Zone 3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"Main/Zone 2/Zone 3": Will be output when
selected as input source of main room, Zone
2 or Zone 3 playback
7.Hardware Setup
Multi Zone
Setting Item Default Value Setting Details
Zone 2 Out Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 2 Maximum
Volume
Off Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Zone 2 Power On
Volume
Last Set the Zone 2 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
r
You cannot set a higher value than that of
"Zone 2 Maximum Volume".
Zone 3 Out Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 3 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 3 Maximum
Volume
Off Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Zone 3 Power On
Volume
Last Set the Zone 3 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
r
You cannot set a higher value than that of
"Zone 3 Maximum Volume".