User's Manual

WESROC
®
RMS Industrial CTM - Operation Manual - Independent Technologies, Inc.
72-70-209, Rev. A Page 15 01/18/2017
PDU Screens
Logo Screen:
This is the first screen displayed when the PDU is powered up. This screen will contain the
Independent Technologies logo, or may contain your company logo if arrangements have
been made for a custom logo. Press the right arrow key on the PDU to move to the List
Screen. This screen will only be displayed once when the PDU is powered on.
Device List Screen:
Each line on this screen represents a WESROC
®
RMS device that has transmitted a data
packet in the recent past. The serial number of the device will be displayed on the left side
of the screen. A configuration data packet from a CTM will be noted by the “CelMon” or
“CelTnk” device label in the middle of the screen. The time since the last transmission from
each device is listed on the right side of the screen. Press the up arrow or down arrow
keys to select the desired device. Press the right arrow key to move to the Main Menu
Screen.