User's Manual

WESROC
®
RMS Industrial CTM - Operation Manual - Independent Technologies, Inc.
72-70-209, Rev. A Page 19 01/18/2017
Command List Screen:
This screen contains a list of commands that can be used to control or configure the CTM.
Press the up arrow and down arrow keys to move between the various commands.
Press the right arrow key to execute a command or to configure a parameter on the CTM.
Press the left arrow key to return to the Main Menu Screen.
NOTE: A PDU with firmware earlier than version 5.0 will not have a Command List Screen,
but will instead show the ‘Ping’ command on the Main Menu Screen. The firmware on most
PDUs can be updated to include the Command List Screen. Check with ITC customer
support for assistance.