Operating instructions

Special applications and functions

AG 31

Place the requested weight in the middle of the weighing pan.

During the calibration, the horizontal segments are displayed.

Note

You can abort the ongoing calibration at any time by briefly pressing the «C»

key.

On completion of the calibration procedure, you are prompted to lift off the

weight. Remove the weight from the weighing pan.

After removal of the weight, the balance shows the end of the calibration

procedure and then returns to the weighing mode.

Note

If the calibration can not be performed properly (e.g. owing to vibrations),

the balance aborts the calibration procedure and “Abort” appears in the

display. Press the «C» key to clear this message and restart the calibration

procedure.

If your balance is connected to a printer, the adjustment (calibration) is

recorded automatically in conformance with GLP. The record opposite is a

specimen printed out with the METTLER TOLEDO LC-P45 Printer. Records

printed with other printers may differ somewhat from the example shown.

CAL donE

Cal

------

=0000

Abort

--BALANCE CALIBRATION--

03.02.97 ,11:34:23

METTLER TOLEDO

Balance

Type: AG104

SNR: 54001222

Weight ID:..............

Weight: 100.0000 g

Ext. calibration done

Signature:

........................

--------- END ----------