Operating instructions

Further important information regarding your AG balance
60
Weighing samples or containers which readily absorb or give off moisture
As a result of moisture uptake or evaporation, the weight of the weighing sample continuously increases or
decreases.
All weighing samples or containers made of wood, cardboard, paper, cork (e.g. support for round-bottom flasks),
plastic or rubber can absorb or lose so much moisture that the display is unstable and nonreproducible or wrong
weighing results are displayed.
Whenever possible, containers made of the above materials should be replaced by metal or glass containers.
suitable unsuitable
Always use the smallest possible weighing container as the error tends to
increase with increasing container size. Further, you should use weighing
containers with as narrow a neck as possible and a cover.
Instead of supports made of the materials mentioned above, use the optional
triangular holder. You can order the triangular holder from METTLER TOLDEO
with the number 210435.
Contamination
Powder, liquids or other residues at the edge of the weighing pan or between the weighing pan and the weighing
chamber plate can lead to an unstable display if the weighing pan no longer has complete freedom of movement.
Clean the weighing pan and the weighing chamber plate (see Section 6.3).
Use only clean and dry weighing containers.