Specifications

Transmitter pH M300 V20 34

The newly calculated values M and A are displayed. Select Yes to save the new

calibration values and the successful Calibration is confirmed on the display.

7.6 Edit pH

Enter Calibration mode as described in section 7.2. and select Edit pH.

All calibration constants of the primary measurement (p) for the sensor are

displayed on Line 3. All calibration constants of the secondary measurement (s) for

the sensor are displayed on Line 4. The calibration constants can be changed in

this menu.

Select Yes to save the new calibration values and the successful Calibration is

confirmed on the display.

7.7 Edit mV

Enter Calibration mode as described in section 7.2. and select Edit mV.

All calibration constants of the primary measurement (p) for the sensor are

displayed on Line 3. All calibration constants of the secondary measurement (s) for

the sensor are displayed on Line 4. The calibration constants can be changed in

this menu.

Select Yes to save the new calibration values and the successful Calibration is

confirmed on the display

Printed in Switzerland 52 121 304