Operating instructions

METTLER TOLEDO AT/MT/UMT Balances

Description: After CFP the balance sends the contents of the configuration register

as normal text. Note that this information does not necessarily reflect

the

current

configuration since that could have been changed

temporarily by interface commands. The configuration supplied is

that which is permanently stored in the balance, and which is valid

immediately after the balance has been switched on. The actual

current settings may be recalled by the appropriate commands (e.g.

MS ?).

A typical configuration is transmitted as follows:

CFP

Configuration Print

Function: Prompts the balance to send the contents of the

configuration register.

Format: CFP

S T O R E D S E T T I N G S

SCALE:

Stability Detector (ASD): -3-

Display Resolution (dC) : step by 1

Display Resolution (dF) : step by 1

AutoZero : on

Calibration Method : internal auto

UNIT:

Unit 1 : g

Unit 2 : %

Display Symbols : auto-off

Sound : on

INTERFACE:

Weight Send Method : stable only (S)

Baudrate : 2400

Parity : even

Handshake Method : Pause after line

End-of-line : CRLF

——

(coarse range)

(fine range)