Operating instructions

AT/MT/UMT Balances METTLER TOLEDO

Format: EOL[

mode

|?]

EOL

End-of-Line Mode

Function: Selects the end-of-line mode.

Description:

mode

is either CR or CRLF.

With this command the end-of-line mode can be chosen. Use of this

option is described in the section “End-of-Line”.

EOL CR selects the mode “Carriage Return is End-of-Line”.

EOL CRLF selects the mode “Carriage Return plus Line Feed is End-

of-Line”.

EOL without parameter selects the factory setting.

EOL ? reports the current setting as follows:

EOL=CR

EOL=CRLF

Error: EL if an attempt is made to set “CR” in the CL handshake mode.