Operating instructions

13Application "Dynamic Weighing"

The "Dynamic Weighing" application allows you to determine the weights of unstable sam

ples or to determine weights under unstable ambient conditions. The balance calculates the

weight as the average of a number of weighing operations over a defined time.

Requirement: The function "DYNAMIC" must be assigned to an «Fx» key (see advanced

menu topic "ASSIGN:Fx").

Note: "Switching Units" and "RECALL" Functions are not available in this Application.

DYNAMIC

– Activate function "DYNAMIC" by pressing and holding the appropri

ate assigned «Fx» key.

Setting "Auto Start" or "Manual Start":

MOD. AUTO

MOD. MAN

a) Press « » to select the mode:

– "Auto Start ""MOD. AUTO" (default value). The weighing starts

automatically on relative stability. However, the weighing sample

must weigh at least 5 grams. For weighing samples below 5 g the

weighing must be started manually.

– "Manual Start" "MOD. MAN"

b) Press « » to confirm the selection.

Setting the weighing time:

TIME 3

TIME 5

a) Press « » to select one of the available time intervals: 3 (default

value), 5, 10, 20, 60 and 120 seconds.

b) Press « » to confirm the selected time interval.

Note: If without any key press within 60 seconds, the balance returns to the previous active application. Press

«C» to cancel and returns to the previous active application.

Your balance is now ready for dynamic weighing:

55Application "Dynamic Weighing"