Operating instructions
Complete the settings
a) Click "Apply" when active (wait until active).
b) Click "OK" .
Note: If the "serial key" is enabled, applications that use the same port may not function correctly. Remove the
check mark from the check box "Use Serial Keys" to disable serial key function.
Checking Operation
a) Start Excel (or another application) at the PC.
b) Activate a cell in Excel.
According to your selected "PC-DIR." option, the displayed values will appear in the column one after the other
one in the different rows.
19.2Installing USB Device Interface
To perform the functionality "HOST" with a PC equipped only with a USB Interface, you have to assign an
appropriate USB Driver on the PC first. You can find the "NewClassic Balance USB Installer" on the METTLER-
TOLEDO website at the following address:
www.mt.com/newclassic
Requirements
●
Balance with USB Device Interface.
●
PC with Microsoft Windows
®
operating system (Version , XP SP2 or Vista 32).
●
Internet connection and web browser (e.g. MS Internet Explorer).
●
PC to balance USB connection cable.
Installing the "NewClassic Balance USB Installer" on the PC.
a) Connect to the Internet.
b) Go to the site "www.mt.com/newclassic".
c) Click "Support" tab on the NewClassic Balance Site.
d) Click "Download Center"
e) Click "USB Driver"
Install "NewClassic Balance USB Installer.msi
a) Click "Run" to install (recommended) or
b) Click "Save" to download.
78 Communication with Peripheral Devices