Operating instructions
22Cleaning and Service
Every now and then, clean the weighing pan, draft shield element, bottom plate, draft shield (depending on the
model) and housing of your balance. Your balance is made from high-quality, durable materials and can
therefore be cleaned using a damp cloth or with a standard cleaning agent.
To thoroughly clean the draft shield glass panels, remove the draft shield from the balance. When reinstalling
the draft shield, ensure that it is in the correct position.
Please observe the following notes:
●
The balance must be disconnected from the power supply
●
Ensure that no liquid comes into contact with the balance or the AC adapter.
●
Never open the balance or AC adapter – they contain no components, which can be
cleaned, repaired or replaced by the user.
●
On no account use cleaning agents which contain solvents or abrasive ingredients, as
this can result in damage to the operation panel overlay.
●
Do not clean the IP65 protected models using high-pressure or high-temperature water.
Please contact your METTLER TOLEDO dealer for details of the available service options. Reg
ular servicing by an authorized service engineer ensures constant accuracy for years to come
and prolongs the service life of your balance.
22.1Cleaning the Glass Draft Shield (0.1 mg and 1 mg Models)
Remove the following parts:
a) Remove weighing pan, draft shield element (0.1 mg models) and pan support.
b) Remove the bottom plate.
c) Unlock the draft shield, lift it off the balance and place it on a clean surface.
83Cleaning and Service