Operating instructions

56
Operating instructions METTLER TOLEDO MT/UMT balances
6.5 Additional information
and accessories for your
balance
For below-the-balance weighings
your balance is equipped with an open-
ing for a hanger. Remove the glass
cover of the weighing chamber. Tilt the
balance to the side and swing the cover
of the opening on the underside of the
balance to one side. You can now at-
tach a pan or a holder to the horizontal
hole underneath the weighing pan.
Do not attach these to either of the
two rings!
For the expansion of your balance, for
special applications and for different
types of weighing problems, a variety of
peripheral units and information bro-
chures are available from METTLER
TOLEDO.
7 Any questions?
7.1 What happens if the
weight display
is unstable?
Since it is not always easy to determine
the exact cause of an unstable display
the most frequent sources of error are
listed below.
You will find detailed explanations in
the enclosed booklet “Weighing the
right way”.
An unsuitable location
Strong drafts (e.g. from air conditioning
systems) or vibrations of the bench are
factors that can cause disturbances.
- Look for a suitable location, adapt
the vibration adapter to the local
conditions (see Section 3.3).