Operating instructions

68
Operating instructions METTLER TOLEDO MT/UMT balances
Digit
Display unit; a digit corresponds to a
display increment of the last decimal
place.
-1 digit = 1d = 0.001 mg in the
coarse range
-1 digit = 1d = 0.0001 mg in the
fine range
See also “Readability”
Section 5.5
Dispensing
Fine weighing in of powder or small
quantities of liquid.
Section 3.2
Display
Used for communication between bal-
ance and user. Shows weighing re-
sults, setting options, etc.
Front fold-out
Factory setting
Settings preselected by the manufac-
turer in the menu or configuration regis-
ter for normal applications and ambient
conditions. Characterized in the con-
figuration register by an asterisk in the
upper left corner of the display. Can be
changed by the user, but also reset at
any time.
Sections 3 and 4
Fine range
In the fine range the balance operates
with the greatest possible resolution.
This is the range that is normally used
in work with microbalances.
Sections 2.3 and 2.4
Foot switch
Available as an accessory in single or
twin versions. Control element for zero-
ing (taring) the display, for triggering
the data transmission («Print» key) and
for operation of the automatic door
function of the draft shield. Frees both
hands for operations.