Operating instructions

72
Operating instructions METTLER TOLEDO MT/UMT balances
Resolution (resolving power) of a
balance
See “Readability”
Re-Zero
International designation for the zeroing
of the display and for the zeroing key
(the «Re-Zero» key of your balance).
Also used for zero setting, taring and
the tare bar, although the definitions
are not identical.
Section 1.3
Sector
Part of the configuration register. The
configuration register of your balance
comprises four sectors, each of which
contains various parameters.
Section 4 and pages 78 and 79
Segment
The smallest part of a display. The dis-
play of a letter or a number comprises
several segments.
Front fold-out
Self-test
After connection to the power supply,
the balance automatically performs a
test of its functions.
Section 1.3
Stability detection
See „Automatic stability detection“.
Stabilization time
Also known as weighing speed. It is de-
fined as the time between the loading
of the weighing sample on the weighing
pan and the attainment of stability of
the weight display (see also “Automatic
stability detection”). The stabilization
time can be matched to special needs
with the vibration adapter being the
most important influencing factor.
Sections 3.3, 4.4 and 7.2
Standby
Wait condition. Balance is in opera-
tional readiness (connected to the
power supply via the AC adapter), but
not switched on, i.e. the display is dark,
only the standby symbol is lit up.
Section 1.3