Operating instructions

*
*
*
*
*
*
*
*
*
*
*
*
Cancel
Cancel
Set
Menu
Select 1
Configuration
Select 1
Select 2
AZ
CALIN
Set weighing
process adapter
Set vibration
adapter
Fully automatic
door function
Readability 4)
(fine range)
Autozero
proFACT(Adjustment
and linearization)
Status indicators
Beeper setting End-of-line
mode
Transmission
protocol
Parity
Selection of the menu
Selection of the menu options
Selection of the config. register
Selection of the sectors
Selection of the settings Selection of the parameters
Cancellation of the changes
and return to the weighing mode
Selection of the settings
Cancellation of the changes
and return to the weighing mode
Saving of the settings and
return to the weighing mode
Saving of the current configuration
and return to the weighing mode
Configuration registerMenu
Appears only if weight unit 2 is set in the con-
figuration register to percent ( % ) or piece ( Stk or
PCS ).
1)
Appears only if the internal adjustment
(Auto Off ) is
set in the configuration register.
2)
Appears only if the external adjustment (
USEr ) is
set in the configuration register.
3)
The following appears with the UMT2:
d = 1µg *, 2 µg, 5 µg, 10 µg
dF = 0.1 µg *, 0.2 µg, 0.5 µg, 1 µg
4)
Factory setting
*
Set
Set
Switching off the balance by
pressing key upward