Operating instructions

The “Percent Weighing” application
106
Report Header Line
On the second page of this submenu there are additional settings for percent weighing:
“Ref%, Ref”: Reports the reference in percent and as a weight value.
“Nom., +/–Tol”: Reports the specified target value and the selected toler-
ances.
Factory setting: “Appl. Name” (“Percent Weighing” is printed out) and “date/
time” (in this order); no specific information items for percent
weighing are activated.
The header line is printed automatically if it is defined to be part of the weighing report
(see “Reporting Individual Values”). However, the header can also be printed out separately
by pressing the “Header line” function key.
Reporting Individual Values
On the first and second pages of this submenu, the following special settings for percent
weighing are available:
“Ref%, Ref”: Reports the reference in percent and as a weight value.
“Nom., +/–Tol”: Reports the specified target value and selected tolerances.
“Diff.”: Reports the deviation from the target value as a weight
value.
“Diff. %”: Reports the deviation from the target value in percent.
Factory setting: “Net”; no specific information items for percent weighing are
activated.
The individual values are printed out by pressing the «F» key or, if the automatic print
function is activated, automatically (see section 5.2.5).
Report Footer Line
On the second page of this submenu you can specify which additional items of informa-
tion for percent weighing should be printed out in the footer line of the weighing report
after the results (individual values):
“Ref%, Ref”: Reports the reference in percent and as a weight value.
“Nom., +/–Tol”: Reports the specified target value and selected tole rances.
Factory setting: “Signature” and “Blank Line” (in this order); no specific informa-
tion items for percent weighing are activated.
To print the footer line, press the “Footer Line” function key.
You will find an example of a percent weighing in section 9.4.3.